WOODWORKING UV WATER-BASED PROFILE VACUUM PAINTING MACHINE
A woodworking UV water-based profile vacuum painting machine is a specialized machine used to paint the profiles of woodwork. It employs a vacuum to suck the paint up from a container and then pump it through a nozzle onto the woodwork. This type of machine is typically used in production settings where large quantities of woodwork need to be painted quickly and efficiently.The main advantage of using a water-based paint is that it dries very quickly, which is ideal for production settings. Additionally, water-based paints are generally more environmentally friendly than other types of paints. Another benefit of this type of machine is that it can be used with a variety of different types of paint, including both oil-based and water-based paints.One potential downside of using a water-based paint is that it can be more difficult to control than other types of paint. Additionally, if the paint isn’t applied evenly, it can result in an uneven finish.
Vacuum Coater CH200 -UV
Palmer Primer’s most recent Vacuum Coater is a vacuum coating equipment intended to apply a high-quality coating of primer, paint, stain, or lacquer based on water or white spirit on wood mouldings, MDF boards, and picture frame mouldings. Vacuum Coater CH200 -UV.
Vacuum Coating Equipment Benefits CH200 -UV
Superior, repeatable finish 7,000 to 10,000 metres per day is possible Apply coatings to wood and MDF boards Utilize paints, stains, and lacquers with a water or white spirit basis. Picture frame detail maintained Repetitive conclusion Recycling of unused paint Reduced human error
Superior vacuum-coated finishes on wood and MDF board.
WOODWORKING UV WATER-BASED PROFILE VACUUM PAINTING MACHINE Vacuum Coating equipment is perfect for applying high-quality paint, stains, and lacquers on wood and MDF mouldings such as architrave, skirting board, window-board, torus mouldings, ogee mouldings, dado rail, etc. The most recent vacuum coater from Palmer Primer can apply an even coating of paint to all four sides of a moulding in a single pass, then remove the majority of excess paint using an advanced vacuum coating process, resulting in a finish of the highest quality that can be painted, stained, or lacquered. In contrast to typical spray equipment, any paint not sprayed to mouldings is recirculated rather than wasted, and any extra paint may be pumped into a bucket for future use.
WOODWORKING UV WATER-BASED PROFILE VACUUM PAINTING MACHINE Superior finish on wood and MDF Mouldings.
Utilizing vacuum coating technology allows for a high quality finish, which is helpful for wood merchants, importers, and joinery makers who offer torus, bullnose and chamfer, ogee, architrave, skirting board, window board, and dado rail, etc.
Moldings coated at high speed using a vacuum coater CH200 -UV Using vacuum coating equipment to cover wood and MDF boards may provide far better quality finishes than standard brush priming – and much more quickly than spraying. It is possible to coat 7,000 to 10,000 linear metres of 50mm architrave every day. Picture frame mouldings with rich ornamental details are preserved by vacuum coating. Fine ornamental details are preserved when vacuum coating equipment is used instead of spraying, which is useful for makers of picture frames seeking to increase productivity, enhance quality, and cut paint costs.
Rapid transitions between several profiles
In the top vacuum coating chamber, easily replaceable aluminium templates allow for rapid changeover between coating simple and more complicated designs.
Specifications for Vacuum Coating device CH200 -UV
Extensively manufactured using thick gauge stainless steel plate. Vacuum Coater supported by four robust castors. One control panel houses the Vacuum Coater’s operator controls. Variable feed rate ranging from 11 to 40 metres per minute. The suction for vacuum coating may be toggled between half and full strength. This Vacuum Coating machine can apply several primers, paints, stains, and lacquers based on water and white spirit, provided that the paint maker has advised their usage. Please contact your paint manufacturer for further information. Vacuum Coater CH200 -UV requirements (approx) Dimensions of the machine. Work remove width from height. Power usage (running). Maximum air requirement. Maximum rate of Feed. WOODWORKING UV WATER-BASED PROFILE VACUUM PAINTING MACHINE 2000mm 1000mm 1600mm 935mm 9 Kw – 3 phase 400v 19 c.f.m. 40 metres per minute Timber sizes (CH200 -UV) Minimum width Minimum length Maximum width utmost height 13mm quadrant 910mm 250mm 75mm… Alternately, please pick one of our painting and priming machines for wood and MDF